For Optical Fiber Back Reflectors Only. This is the Cold Mirror version of the 380-00709 end reflector. It is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. The end reflectors can be purchased separately from the back reflector..
This model F6 reflector with back strip is specified for the back reflector housing which couples to a 6 inch (15.24 cm) microwave powered UV lamp configured for optical fiber curing applications. The F6 back reflector assembly is used with OEM models: F300S (6 inch 300 W/inch (15.24 cm 118.11 W/cm) system), F500 (6 inch…
This model F10T2 reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The vented reflector is commonly used with 600…
This model F10T2 reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The vented reflector is commonly used with 600…
This model F10T reflector without back strip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
This model F10T reflector with backstrip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
This model F10T reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
This model F10T reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Phone: +1 410-604-2900
Email: service@miltec.com
+1 443-591-2326
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2025 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions