Back Reflectors

Optical Fiber | F10T2 | Reflector | Backstrip | Vented

This model F10T2 reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave powered UV systems.

Benefits and Features

  • Enhanced reflectivity with Miltec’s premium efficiency reflector exceeds the performance of OEM reflector
  • Precisely shaped elliptical geometry to maximize UV light intensity directed at the fiber
  • Direct replacement for OEM product
  • End reflectors include rectangular cutouts to allow for quartz tube clearance


One number. Everything you need.

If you’d like to place an order, have questions about our products, or need technical support,
we are just a phone call away:

+1 410-604-2900


146 Log Canoe Circle
Stevensville, Maryland 21666 USA


Phone: +1 410-604-2900

After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):

+1 443-591-2326


Phone: +1 410-604-2900
Fax: (+1) 410-604-2906

Made in USA

Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography

©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions