Back Reflectors

Optical Fiber | F10T | Reflector | Backstrip | No Vent

This model F10T reflector with backstrip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.


Benefits and Features

  • Enhanced reflectivity with Miltec’s premium efficiency reflector exceeds the performance of OEM reflector
  • Precisely shaped elliptical geometry to maximize UV light intensity directed at the fiber
  • Direct replacement for OEM product
  • End reflectors include holes to allow for quartz tube clearance


  • F10T reflector kit includes: Main F10T reflector (non-vented with back strip), pair of end reflectors, and 6 mounting screws
  • Reflectors are made from Miltec’s M1000 reflector material
  • Reflectivity equal to or better than OEM R500 and R350 End reflector hole Diameter for quartz tube clearance: 1.0625 inch (27 mm)


One number. Everything you need.

If you’d like to place an order, have questions about our products, or need technical support,
we are just a phone call away:

+1 410-604-2900


146 Log Canoe Circle
Stevensville, Maryland 21666 USA


Phone: +1 410-604-2900

After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):

+1 443-591-2326


Phone: +1 410-604-2900
Fax: (+1) 410-604-2906

Made in USA

Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography

©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions