Always here, Always available
+1 410-604-2900
Quote Request List
Back Reflectors
Optical Fiber | F10T2 | Reflector | No Backstrip | Vented
This model F10T2 reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave powered UV systems.
Benefits and Features
- Enhanced reflectivity with Miltec’s premium efficiency reflector exceeds performance of OEM reflector
- Precisely shaped elliptical geometry to maximize UV light intensity directed at the fiber
- Direct replacement for OEM product
- End reflectors include rectangular cutouts to allow for quartz tube clearance
Specifications
- F10T2 reflector kit includes:
- Main F10T2 reflector (vented without back strip), pair of end reflectors, and 6 mounting screws
- Reflectors are made from Miltec’s M1000 reflector material
- Reflectivity equal to or better than OEM R500 and R350
- End reflectors cutout width for quartz tube clearance: 1.22 inch (31 mm)
SALES AND TECHNICAL SUPPORT
One number. Everything you need.
If you’d like to place an order, have questions about our products, or need technical support,
we are just a phone call away:
+1 410-604-2900
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 443-591-2326
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions