Cross Hatch Adhesion Testing: Procedure and Overview In this guide, we will be demonstrating the process of Crosshatch Adhesion Testing using the crosshatch adhesion tester, following the ASTM D3359 standard. Sample Preparation Clean the Surface: Ensure that the boards are clean and free of any debris. The boards we are using have already been blown…
UV curing is the process by which UV light initiates a photochemical reaction of a UV-curable solution, causing the solution to polymerize.
What is a Microwave UV System? The microwave-powered electrodeless UV lamp is also constructed from a quartz tube containing mercury and a noble gas. It is powered by applying microwave energy to the UV bulb, which excites the mercury into a plasma to produce UV light. What is UV Curing? UV curing is the process…
What is an ARC UV System? An arc UV system comprises electrodes at each end of a tubular-shaped quartz lamp, commonly filled with a blend of mercury and noble gas. By applying electrical discharge from these electrodes within the tubular lamp, the mercury is stimulated into a plasma state, emitting light across the entire UV…
Ultraviolet light (UV) is a type of radiant energy that appears on the electromagnetic (EM) spectrum between visible light and x-rays. It has a shorter wavelength than visible light but higher energy (or frequency). The EM spectrum has seven regions based on wavelength and frequency/energy. UV Light from the Sun vs Man-made Sunlight contains only…
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Phone: +1 410-604-2900
Email: service@miltec.com
+1 443-591-2326
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions