WE ARE MADE IN THE USA | Always here, Always available
+1 410-604-2900
Quote Request List
Products
The latest from
Miltec.
-
Low Voltage Cable | 5 Conductors | 18 AWG
This is an excellent LV cable to use for interconnect applications to connect low voltage control wires.
-
Low Voltage High Temperature Wire
This Low voltage, high temperature wire is an excellent choice for control wiring on the inside of UV arc lamp modules.
-
Low Voltage Cable | 4 Conductor | 24 AWG
Typically used for more complex control signal applications
-
Low Voltage Cable | 3 Conductors | 24 AWG
Typically used for control signal applications requiring Vcc, Common, and signal.
-
High Voltage Cable Conductor | 13AWG
This high voltage cable is recommended as an interconnect cable from the power supply cabinet to the UV lamp housing for lamp power.
-
High Voltage | High Temperature Wire
This High voltage, high temperature wire is an excellent choice for lamp power wiring on the inside of UV arc lamp modules. It has an excellent high temperature rating of 482°F (250°C) and a high voltage rating of 25kvdc.
-
Potential Transformer
This Potential Transformer is designed to reduce the UV lamp voltage to a safe level so that the Panel mounted Volt Meter can display the UV lamp voltage readout. The Potential Transformer can also output the reduced voltage signal to a Miltec LVM sensor board.
-
Current Transformer
This Current Transformer is used with MILTEC UV’s Panel mounted Amp Meters. When used with the Panel mounted Amp Meters, the operators can safely read the lamp amperage since the current transformer reduces the UV lamp amperage to a safe level.
-
Panel Mount Voltmeter | 3.5 Inch | 2500 Volt
This is a Volt Meter designed to mount to the front panel of a power supply cabinet to allow the operator to easily read the actual UV lamp operating voltage. This is very helpful when trying to troubleshoot a UV system or UV lamp problem. Direct replacement for all Aetek panel mount voltmeters.
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 410-604-2900
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2025 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions