WE ARE MADE IN THE USA | Always here, Always available
+1 410-604-2900
Quote Request List
Products
The latest from
Miltec.
-
Low Voltage | Chassis Socket | Male | 6 Pin
Low voltage chassis style connector, 6 pin male, for use with low voltage, high temperature internal lamp wire (Miltec P/N 010-00380). Typically mounts on outside of lamp housing and mates to lamp control cable with 6-pin female connector (Miltec P/N 220-40830).
-
High Voltage Plug | Male | 1 Pin
High voltage plug, single pin, for use with shielded cable P/N 010-00390. This plug is typically used at the end of the HV cable that plugs into the ballast cabinet to power the UV lamp. Typically, two HV cables with this plug are required for each lamp.
-
High Voltage Plug | 90° Turn | Female | 1 Pin
High voltage plug, 90° turn, female single pin, for use with shielded cable P/N 010-00390. This plug is typically used at the end of the HV cable that plugs into the lamp housing to power the UV lamp. Typically, two HV cables with this plug are required for each lamp.
-
High Voltage Plug | Female | 1 Pin
High voltage plug, female single pin, for use with shielded cable P/N 010-00390. This plug is typically used at the end of the HV cable that plugs into the lamp housing to power the UV lamp. Typically, two HV cables with this plug are required for each lamp.
-
High Voltage Chassis | Connector | Male | 1 Pin
High voltage chassis style connector, single male pin, for use with high voltage, high temperature wire P/N 010-00372. Mates with HV cable connector with single female pin (Miltec P/N 220-40810).
-
Protective Wire Sleeving, UV Large Diameter
This high temperature UV large diameter protective sleeving provides extra protection for wires located inside of a UV lamp housing. The sleeving protects the wire from constant exposure to radiant heat and UV light and is this size sleeving is typically used to protect the larger diameter high voltage cable or wire that is used…
-
Protective Wire Sleeving, Small Diameter
This high temperature sleeving provides extra protection for wires located inside of a UV lamp housing. The sleeving protects the wire from constant exposure to radiant heat and UV light and is typically used to protect low voltage, smaller diameter wire that is used for control wiring and is installed on the inside of arc…
-
Protective Wire Sleeving, Medium Diameter
This high temperature protective sleeving provides extra protection for wires located inside of a UV lamp housing. The sleeving protects the wire from constant exposure to radiant heat and UV light and is typically used to protect the high voltage,14 gauge wire that is used for lamp leads and lamp power wire which is installed…
-
Low Voltage Cable | 12 Conductors | 16 AWG
Used for interconnect applications in low voltage wiring applications.
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 410-604-2900
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2025 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions