This model F10T reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
This model F10T reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
This Cold Mirror reflector kit is specified for the model I6 product family. Miltec’s Cold Mirror reflector will absorb the unwanted infrared (IR) energy, which removes virtually all of the focused IR on the work surface to minimize the heat load on the substrate. The other major benefit of Miltec’s Cold Mirror reflector is its…
This Cold Mirror reflector kit is specified for the model I6 product family. Miltec’s Cold Mirror reflector will absorb the unwanted infrared (IR) energy, which removes virtually all of the focused IR on the work surface to minimize the heat load on the substrate. The other major benefit of Miltec’s Cold Mirror reflector is its…
This Milcure M1000 reflector kit is specified for the model I6 product family. Miltec manufactures this reflector with a premium reflector material that outperforms the OEM’s R500 reflector. Miltec forms its curvature into a very precise ellipse to ensure maximum peak irradiance UV output from the lamp system. Part #380-00622
This Cold Mirror reflector kit is specified for the model I300M product family, which is the newer “metric” model of the I300 lamp family. Miltec’s Cold Mirror reflector will absorb the unwanted infrared (IR) energy, which removes virtually all of the focused IR on the work surface to minimize the heat load on the substrate.…
This Milcure M1000 reflector kit is specified for the model I300M product family, which is the newer “metric” model of the I300 lamp family. Miltec manufactures this reflector with a premium reflector material that outperforms the OEM’s R500 reflector. Miltec forms its curvature into a very precise ellipse to ensure maximum peak irradiance UV output…
This Milcure M1000 reflector kit is specified for the model I300E product family. Miltec manufactures this reflector with a premium reflector material that outperforms the OEM’s R500 reflector. Miltec forms its curvature into a very precise ellipse to ensure maximum peak irradiance UV output from the lamp system. Part #380-00601
This Milcure M1000 reflector kit is specified to replace the OEM’s R500 reflector in the model I250 product family. Miltec manufactures this reflector with a premium reflector material that outperforms the OEM’s R500 reflector. Miltec forms its curvature into a very precise ellipse to ensure maximum peak irradiance UV output from the lamp system. Part…
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Phone: +1 410-604-2900
Email: service@miltec.com
+1 443-591-2326
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions