Always here, Always available
+1 410-604-2900
Quote Request List
I600
The latest from
Miltec.
-
I600 | Magnetron Kit
This magnetron kit is specified for use in the OEM model I600 family of microwave powered UV lamp housings. Miltec’s magnetrons have a proven track record as the longest lasting and most reliable magnetrons used in microwave powered UV lamp systems. Installing Miltec magnetrons in your lamps will result in big cost savings, reduced downtime,…
-
Reflector Gasket Kit | F10
This is the orange rubber gasket kit that is used with the F10T back reflector. This kit includes a set of pre-cut gaskets to fit onto the rim of the F10T to help ensure a good “light tight” sealing of the F10T reflector housing to the 10 inch (25.4 cm) lamp housing. Miltec’s gaskets are…
-
Optical Fiber | F10T | Reflector | No Backstrip | No Vent
This model F10T reflector without back strip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
-
Optical Fiber | F10T | Reflector | Backstrip | No Vent
This model F10T reflector with backstrip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
-
Optical Fiber | F10T | Reflector | No Backstrip | Vented
This model F10T reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
-
Optical Fiber | F10T | Reflector | Backstrip | Vented
This model F10T reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
-
I600 | Reflector | Cold Mirror
This Cold Mirror reflector kit is specified for the model I600E product family which is the original “English” model of the I600 lamp. Miltec’s Cold Mirror reflector will absorb the unwanted infrared (IR) energy, which removes virtually all of the focused IR on the work surface to minimize the heat load on the substrate. The…
-
I600 | Reflector Kit | Cold Mirror
This Cold Mirror reflector kit is specified for the model I600E product family which is the original “English” model of the I600 lamp. Miltec’s Cold Mirror reflector will absorb the unwanted infrared (IR) energy, which removes virtually all of the focused IR on the work surface to minimize the heat load on the substrate. The…
-
I600 | Reflector Kit | Special Cold Mirror
This Milcure M1000 reflector kit is specified to replace the OEM’s R500 reflector in the model I600M and LH10 product family. Miltec manufactures this reflector with a premium reflector material that outperforms the OEM’s R500 reflector. Miltec forms its curvature into a very precise ellipse to ensure maximum peak irradiance UV output from the lamp…
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 443-591-2326
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions