Always here, Always available
+1 410-604-2900
Quote Request List
I250
The latest from
Miltec.
-
I250 | UV H+ Bulb
Miltec’s electrodeless H+ type UV bulb is made for 10 inch (25.4 cm) 300 or 375 Watt per inch (118.11 or 147.64 W/cm) microwave powered UV curing systems. Part # 380-00002 What is a UV H+ Bulb? The H+ bulb is a medium pressure Mercury vapor bulb that produces a range of light output from…
-
I250 | UV H Bulb
Miltec’s electrodeless H bulb is the direct replacement for the Heraeus UV bulb. Made for 10 inch (25.4 cm) 300 or 375 Watt per inch (118.11 or 147.64 W/cm) microwave powered UV curing systems. Part # 380-00001 What is a UV H Bulb? The H bulb is a medium pressure Mercury vapor bulb that produces…
-
I250 | Magnetron Kit
This magnetron kit is specified for use in the OEM model I250 family of microwave powered UV lamp housings. The version of our magnetron that has excellent life expectancy. Part #380-00902
-
Reflector Gasket Kit | I250/I600M
Part #380-80252
-
Reflector Gasket Kit | F10
This is the orange rubber gasket kit that is used with the F10T back reflector. This kit includes a set of pre-cut gaskets to fit onto the rim of the F10T to help ensure a good “light tight” sealing of the F10T reflector housing to the 10 inch (25.4 cm) lamp housing. Miltec’s gaskets are…
-
Optical Fiber | F10T | Reflector | No Backstrip | No Vent
This model F10T reflector without back strip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
-
Optical Fiber | F10T | Reflector | Backstrip | No Vent
This model F10T reflector with backstrip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
-
Optical Fiber | F10T | Reflector | No Backstrip | Vented
This model F10T reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
-
Optical Fiber | F10T | Reflector | Backstrip | Vented
This model F10T reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 443-591-2326
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions