Always here, Always available
+1 410-604-2900
Quote Request List
Aetek
The latest from
Miltec.
-
Mercury Contactor | 120V Coil | Normally Open
This is a high voltage Mercury Contactor that energizes or switches capacitors on or off in order to change the UV lamp power level.
-
Lamp Holder | Clamp Down Style
Direct Replacement Ceramic standoff with metal clamp lamp holder, for lamps with metal ends.
-
Ceramic Standoff | 0.625 Inch | Cone Style
This is a high voltage ceramic standoff used to terminate a UV lamp High Voltage wire lead inside lamp housing.
-
Ceramic Standoff | 0.5 Inch | Barrel Style
Direct replacement, high voltage ceramic standoff used to terminate lamp’s HV wire lead inside lamp housing.
-
Ceramic Standoff |1 Inch | Tall Cone Style
Direct replacement high voltage ceramic standoff used to terminate lamp’s HV wire lead inside lamp housing.
-
Thermal Switch |195°F
This Thermal Switch is typically used in UV lamp units as a safety interlock to prevent a UV Lamp from overheating. It is designed to trip a circuit when reaching 195°F (90.56°C).
-
Shutter Limit Switch | Long Lever
This switch is used as a shutter limit switch to indicate that a Reflector/shutter is open or closed. The switch utilizes a Long lever with a Curved tip. This switch is also commonly used on all Aetek model UVPAK and UltraPAK lamp modules.
-
Shutter Limit Switch | Short Lever
This switch is used as a shutter limit switch to indicate that a Reflector/shutter is open or closed. The switch utilizes a Short lever with a roller. This switch is also commonly used on all Aetek model UVXL lamp modules.
-
Interlock Switch | UV Lamp Housing
This Interlock switch is typically used to trip an interlock circuit and turn the UV Lamp off when a Lamp cassette is removed from the outer lamp housing. This safety interlock position switch utilizes a Long lever with a Roller to activate the switch. It is also a direct replacement for all Aetek model UVXL…
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 443-591-2326
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2025 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions