This Cold Mirror reflector kit is specified for the model I6 product family. Miltec’s Cold Mirror reflector will absorb the unwanted infrared (IR) energy, which removes virtually all of the focused IR on the work surface to minimize the heat load on the substrate. The other major benefit of Miltec’s Cold Mirror reflector is its…
This magnetron kit is specified for use in the OEM model I300 family of microwave powered UV lamp housings with excellent expected life. Part #380-00951
Part #380-80254
Part #380-80253
This model F6 reflector without back strip is specified for the back reflector housing which couples to a 6 inch (15.24 cm) microwave powered UV lamp configured for optical fiber curing applications. The F6 back reflector assembly is used with OEM models: F300S (6 inch 300 W/inch (15.24 cm 118.11 W/cm) system), F500 (6 inch…
For Optical Fiber Back Reflectors Only. This is the Cold Mirror version of the 380-00709 end reflector. It is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. The end reflectors can be purchased separately from the back reflector..
For Optical Fiber Back Reflectors Only. This end reflector kit is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of end reflectors. These end reflectors are included in the cold mirror (cold/cold configuration) reflector kits that Miltec supplies for these UV systems. However,…
For Optical Fiber Back Reflectors Only. This is the cold mirror version of the 380-00707 end reflector. It is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. The end reflectors can be purchased separately from the back reflector..
For Optical Fiber Back Reflectors Only. This end reflector kit is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of end reflectors. These end reflectors are included in the cold mirror (cold/cold configuration) reflector kits that Miltec supplies for these UV systems. However,…
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Phone: +1 410-604-2900
Email: service@miltec.com
+1 443-591-2326
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2025 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions