Always here, Always available
+1 410-604-2900
Quote Request List
10
The latest from
Miltec.
-
I250 | UV H+ Bulb
Miltec’s electrodeless H+ type UV bulb is made for 10 inch (25.4 cm) 300 or 375 Watt per inch (118.11 or 147.64 W/cm) microwave powered UV curing systems. Part # 380-00002 What is a UV H+ Bulb? The H+ bulb is a medium pressure Mercury vapor bulb that produces a range of light output from…
-
I250 | UV H Bulb
Miltec’s electrodeless H bulb is the direct replacement for the Heraeus UV bulb. Made for 10 inch (25.4 cm) 300 or 375 Watt per inch (118.11 or 147.64 W/cm) microwave powered UV curing systems. Part # 380-00001 What is a UV H Bulb? The H bulb is a medium pressure Mercury vapor bulb that produces…
-
Nordson, Magnetron Kit
This Super Life magnetron kit is specified for use in the OEM model Coolwave or Mac 10 family of microwave powered UV lamp housings. Miltec’s Super Life magnetrons have a proven track record as the longest lasting and most reliable magnetrons used in microwave powered UV lamp systems. Installing Miltec Super Life magnetrons in your…
-
I600 | Magnetron Kit
This magnetron kit is specified for use in the OEM model I600 family of microwave powered UV lamp housings. Miltec’s magnetrons have a proven track record as the longest lasting and most reliable magnetrons used in microwave powered UV lamp systems. Installing Miltec magnetrons in your lamps will result in big cost savings, reduced downtime,…
-
I250 | Magnetron Kit
This magnetron kit is specified for use in the OEM model I250 family of microwave powered UV lamp housings. The version of our magnetron that has excellent life expectancy. Part #380-00902
-
Reflector Gasket Kit | I250/I600M
Part #380-80252
-
Reflector Gasket Kit | F10
This is the orange rubber gasket kit that is used with the F10T back reflector. This kit includes a set of pre-cut gaskets to fit onto the rim of the F10T to help ensure a good “light tight” sealing of the F10T reflector housing to the 10 inch (25.4 cm) lamp housing. Miltec’s gaskets are…
-
Optical Fiber | F10T | Cold Mirror | End Reflector | 40mm
For Optical Fiber Back Reflectors Only. This is the Cold Mirror version of the 380-00709 end reflector. It is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. The end reflectors can be purchased separately from the back reflector..
-
Optical Fiber | F10T | End Reflector | w/Bend
For Optical Fiber Back Reflectors Only. This end reflector kit is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of end reflectors. These end reflectors are included in the cold mirror (cold/cold configuration) reflector kits that Miltec supplies for these UV systems. However,…
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 443-591-2326
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions