UV Bulbs

I6 | V Bulb

Miltec’s electrodeless V type UV bulb is made for 6 inch (15.24 cm) 500 Watt per inch (196.85 W/cm) microwave powered UV curing systems. The V bulb is a medium pressure Mercury vapor bulb with a unique metal additive. When energized, the metal additive and Mercury vaporize into a plasma to produce a wide distribution range of UV light with most of its output in the UVV range. The UVV wavelength range is extremely effective when curing through the depths of pigmented resins, and particularly effective when curing white pigmented resins . All Miltec UV electrodeless bulbs are manufactured in a very tightly controlled process environment to ensure maximum and consistent performance throughout the life of the bulb.

Part #380-00304

Benefits and Features

  • A direct replacement for Heraeus #558417
  • Produces extremely high peak irradiance of UV light at work surface
  • Enhanced output in the UVV range
  • Constructed with the purest materials available to ensure maximum hours of usage and optimum performance
  • Every UV bulb is thoroughly tested to ensure consistent size, geometry, output, and performance will meet or exceed OEM specifications
  • Bulb life warranty matches OEM warranty
  • Competitively priced

Specifications

  • Size classification: 6 inch (15.24 cm) bulb x 9 mm diameter
  • Specified for the following OEM lamp housing models: I6P1, I6P2, I6P3, and I6B
  • V bulb spectral output (most of output in UVV range)
  • 500 W/inch (196.85 W/cm) power rating
  • Requires proper air cooling (refer to manual)

SALES AND TECHNICAL SUPPORT

One number. Everything you need.

If you’d like to place an order, have questions about our products, or need technical support,
we are just a phone call away:

+1 410-604-2900

Headquarters

146 Log Canoe Circle
Stevensville, Maryland 21666 USA

Support

Phone: +1 410-604-2900
Email: service@miltec.com

After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):

+1 443-591-2326

Sales

Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com

Made in USA

Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography

©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions