Filter Set for P150

Filter Set 380-01507

Part #:

Miltec P/N:  380-01507

OEM P/N:  066394


This filter is cut to size for use on OEM model P150 power supply. Its function is to filter the intake air to help prevent external contaminates from entering the P150 power supply. It is a direct replacement for the OEM filter.

Benefits and Features:

This is a 2 ply polyester filter that is chemically bonded together with a moisture resistant and fire retardant bonding agent. The outer layer acts as a pre-filter which allows for high efficiency and extremely low air flow resistance with no oils or adhesives needed. Miltec’s high efficient air filter will ensure clean air is delivered to the system, and hence, significantly reduce the user’s cost of consumable parts and equipment maintenance.


60% to 70% filtration efficiency as determined by National Bureau of Standards discoloration procedures using atmospheric dust
2 ply polyester construction from 100% synthetic fibers
Static pressure loss of less than 0.15” W.G. up to 350 ft/min air velocity (37 Pa up to 1.78 m/s)
Each piece is 6.5” x 6.5” (165mm x 165mm) to fit the P150 Power Supply
Custom sizes and rolls available upon request
Total thickness of 1” (25mm)
20 pieces per set