February 10, 2021, Stevensville, MD – Miltec UV, 146 Log Canoe Circle (www.miltec.com) is pleased to announce that Paul Dounian joined their sales team on November 30, 2020.  Paul came to Miltec from Mettler Toledo where he spent the last … Continue reading →

October 26, 2020 Stevensville, MD – Miltec UV’s innovative HPI UV System with leading-edge Gloss Control technology enables manufacturers to achieve an extremely wide gloss range (as high as 50 gloss units) using a single UV coating. Low, medium and … Continue reading →

September 30, 2020 Stevensville, MD – Miltec UV International, (www.miltec.com) has been awarded a contract from the Defense Logistics Agency, to demonstrate the cell technology to produce solid state lithium-ion batteries using Miltec’s UV cured Gel Polymer Electrolyte.  This technology … Continue reading →

Miltec UV is partnering with the UMD Robert H. Smith School of Business to host two under-graduate students this summer as part of the school’s Global Marketing Virtual Internship Program. The students matched with Miltec UV are Kaylee Towey, a … Continue reading →

Miltec UV of Stevensville Maryland, a family operated business specializing in UV curing systems, is celebrating 30 years in business in 2020. The company has changed dramatically over the years from being a distributor of industrial UV (ultraviolet) curing systems … Continue reading →

Published November 4, 2019 Miltec UV is your only source for UV curing equipment highlighting all three UV technologies – ARC, Microwave and UV LED. Their unwavering commitment to customer support and forward thinking in global markets is evident in … Continue reading →

Stevensville, MD – Miltec UV, 146 Log Canoe Circle (www.miltec.com) continues to advance its revolutionary UV binder technology.  This patented high-speed UV electrode binder can run from 5-300 fpm for coatings up to 10 mg/cm2 active material content. This innovative … Continue reading →

  Stevensville, MD – Miltec UV, 146 Log Canoe Circle (www.miltec.com) partnered with the University of Maryland QUEST Capstone Consulting Project this past fall. Quality Enhancement Systems and Teams (QUEST) is a multidisciplinary engineering, technology, and management program at the University … Continue reading →

Stevensville, MD- Miltec UV, 146 Log Canoe Circle (www.miltec.com) is pleased to announce Oliver Hamann as its new Director of Operations. Oliver joined Miltec on June 11, 2018 and brings over 20 years of extensive knowledge in Systems Engineering, Opto-Mechanical … Continue reading →

  Stevensville, MD- Miltec UV, 146 Log Canoe Circle (www.miltec.com) is proud to announce that Olivia Blandford, the daughter of Bob Blandford (Miltec’s president), has been recognized as the winner of the Radtech Student Poster Competition during a special awards … Continue reading →

Stevensville, MD – Miltec UV, 146 Log Canoe Circle (www.miltec.com) has introduced a NEW revolutionary technology, the first of its kind. This new high-speed coating and curing technology is performed using Miltec’s new CX400 which reduces the cost of improving … Continue reading →

Stevensville, MD – Miltec UV, 146 Log Canoe Circle (www.miltec.com) is pleased to announce that Steve Donohue joined their team on October 2, 2017 as Northeast Regional Sales Manager. Steve has worked in sales for the past 25 years and … Continue reading →

Dr. John Arnold, Research and Development Director at Miltec UV International, 146 Log Canoe Circle, Stevensville, MD announced the company’s launch of a new system to coat lithium ion battery anodes with a ceramic coating to significantly improve safety, reduce … Continue reading →

  Several Miltec UV owners, employees and their families, participated in the annual Haven Ministries Run4Shelter, Moonlight Edition. This year the inspirational event was held in the evening at a new venue, right down the street from Miltec on Log … Continue reading →

  Stevensville, MD – Miltec UV, 146 Log Canoe Circle (www.miltec.com) welcomes Gene Shellenberger as the newest member of their engineering team. Gene joined Miltec UV on July 17, 2017 as a Senior Process Engineer. He brings over 20 years … Continue reading →

The night before International Women’s Day, I found myself wondering what would happen if all of the women at Miltec UV decided not to come to work. What would “A Day Without Women” be like at Miltec UV? Fortunately, this … Continue reading →

FOR IMMEDIATE RELEASE February 17, 2017 Joe Blandford, VP of R&D for Miltec UV, has announced the CX400 pilot plant is now available for testing on customer’s substrates at their facility located at 146 Log Canoe Circle, Stevensville, MD, USA. … Continue reading →

January 30, 2017 Miltec UV’s Bob Blandford Appointed to the IMDA Board of Directors Stevensville, MD – Miltec UV, 146 Log Canoe Circle proudly announces that Robert (Bob) Blandford was appointed to the IMDA Board of Directors on October 7, … Continue reading →

Stevensville, MD – Miltec UV, USA. The Department of Transportation Federal Aviation Administration awarded Miltec UV owner and founder, Joseph B. Blandford, Jr. The Wright Brothers “Master Pilot” Award on November 26, 2016. Mr. Blandford was presented the award by … Continue reading →

For Immediate Release July 15, 2016 Stevensville, MD- The owners and employees of Miltec UV rallied together to solicit donations, funds and support from the local community for the victims of the recent West Virginia floods. Several managers at Miltec UV … Continue reading →