F10T2 Optical Fiber Back Reflector, Cold Mirror without Backstrip & Non-Vented

Part #:

Miltec P/N:  380-00657

OEM P/N:  527651

Description:

This model F10T2 Cold Mirror reflector without back strip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. Miltec’s cold mirror reflectors will absorb virtually all of the infrared (IR) energy emitted by the UV bulb, which will eliminate almost all of the focused IR at the fiber. In addition, the cold mirror reflector produces very high reflectivity of UV light in the UVA, UVB, and UVC ranges. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The non-vented reflector is commonly used with 300 or 375 W/inch 10 inch microwave powered UV lamp systems.

Benefits and Features:

  • Reduces Infrared (IR) heat load on the fiber
  • Enhanced UV reflectivity with Miltec’s premium cold mirror design outperforms OEM product
  • Precisely shaped elliptical geometry to maximize UV light intensity directed at fiber
  • Direct replacement for OEM product
  • End Reflectors include cut-out for quartz tube clearance

Specifications:

F10T2 Cold Mirror reflector kit includes: Cold Mirror Main F10T2 reflector (non-vented without back strip), pair of M1000 end reflectors, and 6 mounting screws
End reflector cutout width for quartz tube clearance: 1.22 inch (31 mm)