Part #:Miltec P/N: 380-01507
OEM P/N: 066394
This filter is cut to size for use on OEM lamp model I6B (with K6 modular blower). Its function is to filter the intake air to help prevent external contaminates from entering the I6B UV lamp. It is a direct replacement for the OEM filter.
Benefits and Features:
This is a 2 ply polyester filter that is chemically bonded together with a moisture resistant and fire retardant bonding agent. The outer layer acts as a pre-filter which allows for high efficiency and extremely low air flow resistance with no oils or adhesives needed. Miltec’s high efficient air filter will ensure clean air is delivered to the system, and hence, significantly reduce the user’s cost of consumable parts and equipment maintenance.
|60% to 70% filtration efficiency as determined by National Bureau of Standards discoloration procedures using atmospheric dust.|
|2 ply polyester construction from 100% synthetic fibers|
|Total thickness of 1” (25mm)|
|Static pressure loss of less than 0.15” W.G. up to 350 ft/min air velocity (37 Pa up to 1.78 m/s)|
|20 pieces per set|
|Each piece is 6.5” x 6.5” (165mm x 165mm) to fit I6B|
|Custom sizes and rolls available upon request|