Filter Set – K300 Blower, used on I300B, I300MB (top & front filters)

Part #:

Miltec P/N:  380-01506

OEM P/N:  066398, 584441 (set of 5)


This filter is cut to size for use on OEM UV lamp models: I300B and I300MB (with K300 modular blower). The filter is installed on the outside of the lamp blower cover to help prevent external contaminates from entering the UV lamp. It is a direct replacement for the OEM filter.

Benefits and Features:

This is a 2 ply polyester filter that is chemically bonded together with a moisture resistant and fire retardant bonding agent. The outer layer acts as a pre-filter which allows for high efficiency and extremely low air flow resistance with no oils or adhesives needed. Miltec’s high efficient air filter will ensure clean air is delivered to the system, and hence, significantly reduce the user’s cost of consumable parts and equipment maintenance.


60% to 70% filtration efficiency as determined by National Bureau of Standards discoloration procedures using atmospheric dust.
2 ply polyester construction from 100% synthetic fibers
Total thickness of 1” (25mm)
Static pressure loss of less than 0.15” W.G. up to 350 ft/min air velocity (37 Pa up to 1.78 m/s)
20 pieces per set
Each piece is 3.5” x 14.5” (89mm x 368mm) to fit I300B & I300MB lamp with K300 blower
Custom sizes and rolls available upon request