Part #:Miltec P/N: 380-01516
OEM P/N: 290634
This filter is cut to size for use on OEM remote blower models: PBA-41/60 through PBA-48/60, PBA-38/50 through PBA-45/50. The filter is installed on the air intake plenum of these blowers to help prevent external contaminates from entering the UV lamps. It is a direct replacement for the OEM filter.
Benefits and Features:
This is a 2 ply polyester filter that is chemically bonded together with a moisture resistant and fire retardant bonding agent. The outer layer acts as a pre-filter which allows for high efficiency and extremely low air flow resistance with no oils or adhesives needed. Miltec’s high efficient air filter will ensure clean air is delivered to the system, and hence, significantly reduce the user’s cost of consumable parts and equipment maintenance.
|60% to 70% filtration efficiency as determined by National Bureau of Standards discoloration procedures using atmospheric dust.|
|2 ply polyester construction from 100% synthetic fibers|
|Total thickness of 1” (25mm)|
|Static pressure loss of less than 0.15” W.G. up to 350 ft/min air velocity (37 Pa up to 1.78 m/s)|
|5 pieces per set|
|Each piece is 40” x 124” (1016mm x 3150mm)|
|Custom sizes and rolls available upon request|